分类：Card Cutter
咨询热线：+86 571 63131356
Durable blade, it's made of steel blade.
. Time saving and labor saving.
. Semi-automatic electric card slitter, it's convenient to use.
. High Precision 0.2mm, reasonable structure to ensure the card is cut accurately.
. Unique unitary design of longitudinal cutter case, 10,000times service life
Pls check the link into brower to check video.
YouTube Video Link: https://youtu.be/ZhSri74HVek
Semi-auto card slitter is used for cut business card,photos and various of certificate cards, etc.
It's durable for the steel blade and the blade could be milled by itself to ensure it will be sharp.
This cutter cut business card without rough edges because of its reasonable mechanical structure.
It's with multi-adjustment with nice out appearance.
-Elegant design
-Easy to use, you can operate directly
-Durable balde to cut 10,000times
-Fast, adjustable guide can save your time.
Semi-automatic eletric A4 card slitter with manual feed paper
Semi-automatic eletric A4 card slitter with manual feed paper
How To Operate Card Cutter/Card Slitter?
1.Pls put the business card slitter on hotizontal surface, and then connect plug for card cutter.
2. Insert the content along the fixed feed tension 1 to the feed table in pass through No.2
3.Adjust the adjustable paper feed knob beneath the housing to make sure the center lie in your content must be to the arriow mark 1
4.Adjust paper margin on left side to lock the paper in proper position. If necessary then switch on power to bring out the semi finished cards, and switch off the power when all first pass are completed.
5.insert the semi finished cards along the fixed feed tension 2 into the feed table in pass through No.1
6.The simi finsihed content must be put along the stop knob on the right side colsely by adjusttmtment of adjustable paper feed knob 2 and make sure the arrow mark 2 precisely points at the third broken line in the card paper through see-through window
7.Power on again followed by pressing"the push mark" with two thumbs forward evenly to see semi finihed cards along the fixed feed tension 2 into the feed table in pass through No.1 from see-through window, and then power off as soon as all second pass are completed.
8.Open the lid to clear the confetti or once the content stuck in the blade after all the work are completed and machine is power off.
