名称：SG-720

分类：*Laminating machine

咨询热线：+86 571 63131356

详细说明：

Product Description

SG-720 A1/A2/A3/A4 Single & Double Sides Hot & Cold Laminator Paper Laminating Machine Automatic

.

						This machine covers a small area, is operated conveniently, run fast. It's equipped with automatic temperature-control and speed-regulation, automatic feeding. Several rolls or redundant rolls can be slit at one time, so this machine is regarded as a slitter.

						The machine adopts pre-coated film as the material. It is widely used for lamination on the surface of window packing paper boxes, various books, maps, pictures, certificates, holographic cellphone etc. After the above products are laminated, they have the features of water-resistance, clear graphic arts and strong three-dimensional sense.

Detailed Images

						SG-720 Electric Laminating Machine YouTube Video Link: https://youtu.be/SWA4bMiuuxQ

Model Name	SG-720
Max. Laminate Width	720mm
Laminate Thickness	60-800gsm
Max. Laminate Speed	9m/min
Warming Up Time	10min
Suggested Laminate BOPP Film	25-250mic
Max. Temperature	150 degree
Operating Panel	LCD Screen
Auto Feed Paper with Belt	Yes
Single Laminate	Yes
Double Laminate	Yes
Cold&Hot Laminate	Yes
Cut film knife	Yes
Perforating knife	Yes
Auto rewinding paper	Yes
Reverse	Yes
Dia. of core	1",1.5",3"
The quantity of roller	4pcs
Speed control	9 gear
Power	2.5KW
Voltage	AC110V(60HZ) AC210V~230V(50HZ)
Package	1pcs/Wooden Case
Carton Size	12892112cm
G.W.	180kgs
N.W.	158kgs

Details Parts

1. Conveyor belt	7. Rull fim handle
2. Bottom film	8.Power switch
3.Emergency stop	9. Adjust upper film adapter
4.Adjust bottom film adapter	10.Upper film
5. Operating panel	11. Cut knife
6. Handle	12. Perforating knife

13. Safty cover	19. Pull film roller
14. Limting block
15.Heating upper steel roller
16. Temperature sensor
17. Anti curling bar limiting
18. Anti curling bar

TROUBLESHOOTING
Machine will Not turn on	a.Power switch is in “o” (Off) position b. Tripped circuit breaker. c. Blown main power fuse	a.Put the power switch to the “l” (On) position b. Reset the circuit breaker. c. Replace the fuse.
There is power, but the rollers are not turning after the “RUN” button is pressed	a.Safety cover is not closed. b.Paper guide is not installed correctly c.Blown motor fuse.	a.Close the safety cover to active the safety switch. b.Properly install the paper guide so that the micro switch is activated. c.Replace the motor fuse.
The unit is not heating up	a.The machine is in “COLD” mode. b.Set temperature is lower than the room temperature.	a.Switch to “HOT” mode. b.Raise the temperature according to the recommended film temperature.
The paper is not automatic feeding	a.The paper feeding roller is damaged. b.Paper board is too high	a.Change the roller b.Lower the paper board.
Many papers are feeding at the same time	a. Paper board is too low	a. Turn the paper board up.
Curled lamination:	The main roller temperatures are too low and/or lamination speed is too fast.	Raise the roller temperatures and/or lower the lamination speed.

上一篇：SW520/720S+

下一篇： SG-380

Product

Contact us

*Laminating machine

名称：SG-720

SG-720 A1/A2/A3/A4 Single & Double Sides Hot & Cold Laminator Paper Laminating Machine Automatic

Details Parts